Gas Boilers vs Electric Boilers

The question as to whether gas boilers are better than electric boilers can only be answered after careful consideration of a number of factors which are greatly determined with availability of each and what one prefers. The two methods work by the same principles though using different forms of fuel but the efficiency of each is different from the other which also is to be considered with the anticipated use.


Every of these water heating methods has an advantage over the other with regards to the area of use and the running costs, something that may seem to give a harder time thinking which fits perfectly to one’s preference, but this guide will serve to inform you with detail as possible so as to allow you to make the best choice with regards to your needs.


Cost of installation and running

Gas boilers require more work and cost ( during installation as compared to electric boilers but will have cheaper running costs in the long run compared to the cost of running electric boilers. This initial high cost of installation is comes from the gas pipes to be installed as well as getting an outlet for the fumes and gasses produced while the gas burns. The outlet may include having a chimney or a vent window to help keeping the air clean but all these require extra cost if the gas inlet is not close to those vents provided in the house. Running costs will however become lower for the gas boiler after installation ( is complete than those met while operating electric boiler. This is for the fact that gas is cheaper than electricity, which makes it considerable even with the higher initial installation costs.


Maintenance of the boilers also comes at a higher cost for the gas boilers compared to electric boilers which only need to be checked up when there is an issue with the heating system. This is so due to the multiple mechanical parts that come with a gas boiler together with pipes supplying the gas to the boiler. But this should not disqualify gas boilers as though they need regular maintenance it will be only have to be done after certain period of service or as requested by the manufacturer of the gas boiler. Furthermore, during the service period the gas boiler would have saved one enough money to allow the servicing of the system.


Availability of gas vs. electricity

While not all homes may have gas supply those with gas supply enjoy the advantage of cheaper running costs as compared to those homes entirely using electricity as fuel for their boilers. The areas that lack gas supply though have to entirely depend on electricity as fuel for their boilers or seek alternative methods to heat their water if they feel the costs are heavy are bear. With electricity also numerous challenges are faced especially during power outages. This is a challenge that is usually much felt by those in the more remote areas where it may take several hours or even days before the power problem is rectified. This means that the people affected have to live the time without heating their water or be forced to use alternative means of heating water, something that would not be faced by those using gas for their boilers.


Size of the boiler

Electric boilers are generally more compact than gas boilers and may be more flexible as to the space of installation. This is for the fact that electric boilers ( do not contain many mechanical parts as the gas boilers and also do not a flue or room for the pipes needed to transport gas to the gas boiler.


Everyday use

Gas boilers are considered better by those who have to heat water regularly and those who need to heat large volumes of water at a time. Though electric boilers are better in efficiency when it comes to heating water they can only do so to certain levels. Thus their services are limited to heating water a number of times in a day and at certain limited levels per heating. Gas boilers on the other hand can be used numerous times in a day and to heat larger volumes as long as the boiler can accommodate them without having problems with the boiler.

Do I Need To Repair or Replace my Boiler?

It happens in every household. One morning you may wake up only to find that the thermostat is not responsive. Hopefully, it's a minor problem, say, a clogged filter or a tripped circuit breaker that will only require a quick fix. In some instances, however, the repair cost is usually so big that it begs the question: do I need to repair or replace my home boiler? Well, here's how to find out:



A recent study by the National Association of Home Builders revealed that boilers have an average of 13 to 21 years, depending on the manufacturer. The first step would be to date your boiler system. Most technicians tend to write the year in which the equipment was installed on your unit. Suppose you cannot see a visible sign indicating the year, you could wait until the machine is cool and off. There is a metallic identification plate which is often placed on the inner part of the chamber door. Record the serial number and the model from the metal plate and make a call to the customer service of the manufacturer so as to get the date of your machine. Information regarding how old the system is can enable you to make a decision as to whether you should repair the boiler or replace it. If it well over past half of its lifespan, it is recommended that you acquire a new boiler.



If the problem at hand may pose a hazard, then getting a completely new boiler is the best solution. For instance, if the boiler's heat exchanger has cracked, chances are poisonous carbon monoxide will work its way into your home, something that you probably should not risk. (The heat exchanger is the metal wall that separates the air that is being heated and the burning fuel) However, most issues such as stuck valves and faulty electronics can be repaired, meaning you will be required to perform a cost benefit analysis.



Generally, older boilers cost more to repair as compared to the newer versions. This is mostly due to the fact that manufacturers are slowly stopping to make repair parts for the older boilers. There is, therefore, lack of enough repair parts in the market and the few that are available are overpriced. Suppose your boiler is relatively new but you still find the repair costs quite high, you should find consolation in the fact that that is most likely the only time you will be spending money to repair said boiler.



If your boiler breakdowns are becoming all too frequent, perhaps it is high time you replaced it with a new one. The breakdowns can be quite stressful and a hassle especially during the winter. If its warranty has expired, the repair costs can be quite high and so you may want to consider getting a new one. However, if you are just turning on your boiler in the winter after months of dormancy, it may have minor technical issues but this should not be a cause of worry as it is common in most boilers. You may have it inspected and repaired if necessary.



Suppose the fault with your boiler is fixable, you might want to consider the fact that new boilers with advanced technology tend to consume less energy, hence saves you money. Instead of seeking repairs, replace the boiler so as to cut on energy costs. Furthermore, a boiler which is more efficient will heat up the home faster and do a great job at keeping the entire family warm. If the boiler is already a modern version but develops technical problems, have it repaired by a qualified person.



The performance of the boiler is essential in deciding whether you get a new one or repair your current one. For instance, can you smell the natural gas when the boiler is on? This is a sign that you should call the repair man as it can be quite uncomfortable and bring a sense of displeasure. Other signs to look out for include leaks around the floor and irregular sounds produced by the system. The extent of these irregularities should enable you to decide whether or not to get a new boiler.



If you are not sure whether your boiler needs replacement or repair, you should get it inspected by a local plumbing expert. You could further extend the boiler's life through annual maintenance services.

History of Manchester Plumbing

We often take for granted having heated water at the press of a button. That is until it breaks down, more often than not, in the freezing cold of winter. The terms "Condensate pipe" or "burst pipe" is enough to scare anyone. For the lay-person, fixing such problems are a bit tricky and best left to a professional. Let’s take a look at how boilers began by journeying through the ages to find out more. We can learn a lot about how our Mancunian ancestors dealt with their water supply.


Firstly, how does the average household boiler work? An enclosed vessel of water is heated and the byproduct released is used in a variety of ways such as sanitation, cooking or heating homes. There is a wide expanse of history related to plumbing (the fitting of boilers). It is only through this history, can we see how far boilers have come. In the event that the boiler 'plays up,' a plumber is required. This label dates back to Latin times and was originally known as 'Plumbum'. These men of the trade used a variety of pipes and fixtures to move water from the boiler itself to wherever needed.


Looking at Manchester in particular, which has a history of supplying cotton, and an industry which boomed with the formation of the first ever canal - The Bridgewater. It opened Manchester to a further network of canals which linked it to the rest of England. Manchester also had one of the first telephone exchanges in Europe and reportedly the first omnibus service. The city expanded in wealth and renown, and made great leaps in the creation of boilers and their required parts. Manchester became a hub of educational institutes with the Mechanics Institute opening in 1884. There is no doubt that many skilled plumbers would become highly trained in the future.


In terms of plumbing history, we must go back and take a look at the Romans. The Greeks were famous for having dreamt of the first kind of central heating. This was made possible by a series of fires, which pushed hot fumes around open spaces in the floor. It is indeed more the Romans who will be remembered as "fathers of invention" for their investment in piping. The Romans established a fort called Mamucium in Manchester during C.79. It is long believed that they were the 'Pioneers of engineering' with aqueducts and channels that used lead piping to move water from the nearby rivers. However, with their timely fall, the secret of piping water got lost. Sanitation became less popular with the Christianity movement, deeming bathing to be something vulgar.


Skip forward in time to the 1800s, and Manchester began to see major improvements. An inventor James Shaw produced the first home boiler not reliant on either coal or wood (Flow Energy, 2018). He coined this contraption a 'Geyser'. These resources were deemed only fit for the wealthy. Such is the opposite now, with most modern day homes being fitted with an appliance. Present day, in light of The Clean Air Act (1993) sees the boiler made from more renewable sources in order to maintain a smoke -free environment. As makers and fitters of boilers this continuing legislation is foremost and influences the way modern businesses operate. New boilers made have to comply with legislation. Boilers that are fitted in homes have seen a great deal of change throughout the history in Manchester. The pipes used in the trade have moved from, lead to iron and wood and finally the copper we see today.


From Greeks to Romans and medieval inventors to the plumbers we have today, Manchester has come a long way in providing boilers to the world. Manchester has such a diverse and rich history and the changes seen from textiles, to a vast and expanding infrastructure is evident in the rapid progress that it has made. In the future we can only expect to see more and more advancement in the way that boilers are changed and adapted to meet our needs.

Why Service Your Home Boiler?

Boilers are the number one choice for heating systems among many property owners. This is mainly because they are reliable and last long. However, for your boiler to serve you better and last a really long time, it needs regular and proper inspection and maintenance. If even the smallest issue on your boiler is ignored or is not addressed immediately, it can grow into a bigger problem that can be very difficult or expensive to fix. So, how can you know if your boiler needs to undergo some major repairs or be replaced?


Below are some signs that you should be on the lookout for and know about:

  • You've had your boiler for at least 15 years. Older models or systems of boilers have an average lifespan of around 15 years. Routine maintenance can actually prolong the life of your boiler beyond 15 years, but if you don't invest in certain suitable advances in technology, your system can become faulty once it reaches the 15-year mark. The good news is that there are many upgrades now available for most boiler models (even old ones) that can help you control your heating.
  • You just need to do enough research for this. Your house doesn't feel warm enough. If your house still feels cold even if the heating is already switched on, then your boiler may already have some issues. If your radiators are in good working order, the low temperature in your home can be a sign that your boiler is no longer up to the job of suitably heating your home. In case there are issues with your radiator, it is best to call a plumber or a gas engineer to investigate the reason why your home isn't heating up as it should.
  • There are issues with the boiler's pilot light. If the pilot light has gone out, your boiler will be unable to fire up and start heating water or central heating. You can try fixing this issue by following the manufacturer's instructions on how to remedy this. You will find these instructions on placed on the boiler door, the instruction booklet, or near the pilot light. If it still fails to light after following instructions, you need to call in experts since there might be some blockages or issues with the ignition that only qualified tradesmen can fix or solve. Your boiler has been undergoing lots of regular maintenance and repair services lately. Lastly, if you find yourself frequently resetting or topping up the pressure in your boiler and calling in tradesmen to look at and fix some issues, it may be high time to replace it. Although a new boiler will require significant investment, you will still have to pay for various repairs, and the mounting cost of these services will simply be a huge source of frustration for you.

Why Service Your Home Boiler?

There are three main reasons why you need to service your boiler regularly:



Gas Safe Register ( recommends that you have your boiler serviced annually. In doing this, you may prevent carbon monoxide from leaking into your house. Carbon monoxide is an invisible, odourless, deadly gas that can kill! Many tragedies happen because of carbon monoxide so don't let one of them happen in your household. When servicing your boiler, a qualified gas engineer will check that your boiler is running safely and he will detect if there is any carbon monoxide leaking into your house.


Having your boiler serviced at the recommended times will also help to keep your boiler working efficiently. Not having your boiler serviced annually could result in many problems with the running of your boiler.



If your boiler is serviced annually, you could be saving yourself a lot of money( A boiler that is serviced regularly will run more efficiently and so this may prevent your boiler from breaking down, saving you the cost of getting it fixed. Some call-outs to boiler breakdowns are simply because some dust has got into the boiler causing it to stop working. Regular Servicing could have prevented this. Now you have to pay for the boiler to be fixed, plus the cost of a service. So with these 3 reasons to get your boiler serviced, you can't afford not to! The service should be carried out by a qualified gas engineer who is Gas Safe Registered.